Hot Melter Auxiliary Connection Device

Main Article Content

Yongyong Wang
Dengqiu Ma
Zhenhuan Ye
Jinyan Li

Abstract

PPR pipe and PE pipe are widely used and used in a large amount. The connection mode is mainly hot melt connection, but there are some defects. In order to avoid being scalded by high temperature die head when users use hot melters, there is a large deviation in the connection of PPR pipe and PE pipe, which leads to water leakage or pipe damage at the connection. In this paper, through modular theoretical analysis and SOLIDWORKS three-dimensional modeling software, a three-dimensional model of the auxiliary connection device of the hot melter composed of three-claw clamping mechanism, skateboard docking mechanism and pipe diameter adjustment mechanism is designed. Ideally, the rational use of the auxiliary connection device of the hot melter can reduce the safety hazards during use and improve the accuracy and reliability of the connection process. The auxiliary connection device of the hot melter provides a reference for the research of PPR pipe and PE pipe welding operation, and has certain development significance for the welding technology of PPR pipe and PE pipe.

Article Details

How to Cite
Wang , Y., Ma , D., Ye , Z., & Li, J. (2024). Hot Melter Auxiliary Connection Device. Journal of Research in Multidisciplinary Methods and Applications, 3(5), 01240305002. Retrieved from http://www.satursonpublishing.com/jrmma/article/view/a01240305002
Section
Articles

References

Li Xiangyi, Zhao Bei, Xu Hao, etc. Study on the influence of different water distribution pipe materials on water quality safety [ J ].Water supply and drainage, 2023,59 ( 07 ) : 14-21.

Zhao Jianqing. Discussion on PE pipe fusion technology [ J ]. Shanghai Gas, 2008 ( 05 ) : 5-8.

Zhang Yuchuan. Connection technology of polyethylene pipe system ( 1 ) [ J ].Plastics, 2005 ( 02 ) : 1-6 + 35.

Zhang Yuchuan. Connection technology of polyethylene pipe system ( 2 ) [ J ].Plastics, 2005 ( 03 ) : 8-14.

Gao Zongying, Ding Haoyang, Xia Bingchen, etc. The development of small PE pipe hot melt bonding machine for home decoration [ J ].Journal of Huanggang Normal University, 2018,38 ( 03 ) : 61-63.

Wang Yu. Modular Theory and Application [ J ].Private Technology, 2011 ( 09 ) : 192.

Yilujie.Application strategy of modular methodology in product modeling design [ C ] / / Guangdong Provincial Power Research Institute. Proceedings of the Fifth Academic Exchange Conference on Power Engineering and Technology. [ Publisher unknown ], 2024 : 2.

Most read articles by the same author(s)

<< < 1 2