Reducer Design on Hypocycloid Planetary Transmission
Main Article Content
Abstract
Theoretical analysis was conducted on the formation principle of the hypocycloid, and the tooth profile curve equation of the hypocycloid was constructed using the inner side method of the base circle. Based on the analogy of hypocycloid planetary transmission, a structural composition scheme for a pin wheel planetary reducer based on hypocycloid was designed, and three-dimensional structural models of each component of the reducer were established in SolidWorks software. The complete hypocycloid planetary reducer model was obtained through assembly.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Wang Qin, He Di, Xue Jianhua, et al. Research on Optimization Design of Gear Mesh Efficiency of Drive Axle Cycloid Hypoid Gear [J] China Mechanical Engineering, 2024, 35 (07): 1-10
Zhang Yueming, Li Tianyu, Ji Shuting. The Influence and Parameter Optimization of Cycloid Needle Wheel Reducer Parameters on Transmission Efficiency [J] Journal of South China University of Technology (Natural Science Edition), 2024, 52 (04): 77-87
Cui Jiankun, Ding Jiale, Shi Yuheng, et al. Analysis of tooth profile and meshing characteristics of double cycloid needle gear transmission [J] Mechanical strength, 2024, 46 (02): 424-430
Fu Chao, Guo Xiangkun, Gu Zhenyu, et al. Research on the Transmission Performance of Cycloid Gear actuators [J] Transmission Technology, 2024, 38 (01): 9-12
Su Jianxin, Wang Dongfeng, Xu Jiake, et al. Calculation and simulation analysis of meshing stiffness of cycloidal pinwheel [J] Mechanical Transmission, 2024, 48 (07): 1-7.
Ta-Shi Lai.Design and machining of the epicycloid planet gear of cycloid drives. International Journal of Advanced Manufacturing Technology,2006,28:665～670.
Li Xuan, Chen Bing-kui, Wang Ya-wen, et al. Mesh stiffness calculation of cycloid-pin gear pair with tooth profile modification and eccentricity error[J].Journal of Central South University,2018,25(07):1717-1731.
Junzheng W, Hongzhan L. Modification and Optimization of Cycloidal Gear Tooth Profile Based on Machining Error Compensation[J].Applied Sciences,2023,13(4):2581-2581.
Weimin T, Yinkun H, Yihuang W, et al. Geometry design, meshing analysis and error influences of face-hobbed cycloidal bevel gears with double circular-arc profile for a nutation drive[J].Mechanism and Machine Theory,2022,176.
Chen Weihuan. Differential Geometry (Second edition) [M]. Peking University Press, August 2017.